mikrotik routeros ipsec tunnel configuration

In the Local Endpoint field enter the external IP address of the Edge Gateway.

The Local Id on the Edge Gateway should be the same as the Remote Id on the Mikrotik. It can be an IP address, or a domain name, etc. In the Local Id field, enter a unique identifier. In the Name field, enter the name of the IPsec tunnel. Go to VPN -> IPsec VPN -> IPsec VPN Sites click « +»Įnable IPsec VPN Site, disable Perfect Forward Secrecy (PFS), because with this option enabled, tunnel crashes are observed, in order to avoid problems, we recommend disabling PFS. Go to the Networking tab, select the Edge Gateways subsection and click on Edge Gateway. Open the VMware Cloud Director control panel. RouterOS on Mikrotik version 6.48.1 (Stable). In a real usage scenario, globally routed (public, white) addresses on the Internet will be used instead of this network.

The network 192.168.2.0/24 is the laboratory network. The test stand, on which we will carry out the configuration looks like this: We will do the configuration entirely through the GUI: VMware Cloud Director and Winbox Web interface. Therefore, we will create a separate IPsec Policy for each pair of networks. Implying that we can't aggregate multiple networks into a network with a smaller prefix. Between the Edge Gateway in the cloud and the Mikrotik at the client site, 1 IPsec tunnel is raised and networks on each side are routed through that tunnel. This tutorial covers a scenario where there are 2 local subnets on the client side and 2 local subnets on the Cloud4Y side.

Mikrotik routeros ipsec tunnel configuration